Ordered before 17:30, shipped today - Support: (012) 800 456 789

Track Your Order

All Categories

  • All Categories
  • Cameras
  • Camcorders
  • Digital Cameras
  • Video Splitters & Live Streaming
  • Computer Components
  • Computers & Laptops
  • DJ Equipment
  • Drones
  • Drums & Percussion
  • Imac
  • Keyboards & Synthesizers
  • Lightning
  • Mics
  • Portable Recorders
  • Drums Mics
  • Location Mics
  • Studio Recording Mics
  • Mixers
  • Analog Mixers
  • Digital Mixer
  • Podcasting Kits
  • Tripods, Supports & Rigs

Blackmagic Design 4K Studio Kit

  • $14,495.00
  • Brand: BLACK MAGIC
  • Product Code: Blackmagic Design 4K
  • Availability: 10

The Blackmagic Design 4K Studio Kit from B&H provides the essential components to deliver live and recorded video up to Ultra HD 3840 x 2160 resolution. The kit pairs three 4K Blackmagic Studio Cameras with a collection of rack-mounted Blackmagic studio gear for converting, switching, routing, monitoring, and recording. The cameras output up to 10-bit 4:2:2 UHD video at 30p..

The Blackmagic Design 4K Studio Kit from B&H provides the essential components to deliver live and recorded video up to Ultra HD 3840 x 2160 resolution. The kit pairs three 4K Blackmagic Studio Cameras with a collection of rack-mounted Blackmagic studio gear for converting, switching, routing, monitoring, and recording. The cameras output up to 10-bit 4:2:2 UHD video at 30p over 12G-SDI or optical fiber connectors, with optical fiber offering longer cable runs. Three 98.42' duplex LC single-mode fiber cables are provided for transmitting video and embedded audio to the included ATEM Studio Converter 2, which then converts the signals to SDI for use with the included SDI studio equipment.

To connect all the studio gear and avoid messy manual cable patching, the Blackmagic Smart Videohub 12 x 12 6G-SDI router is included. The router gives you instant connections between all the equipment and can even send the same signal to multiple destinations. One of the key pieces of the included studio gear is the ATEM 1 M/E Production Studio 4K, a live event multicamera production switcher with convenient computer-controlled switching. It features a 1 RU chassis that houses ten UHD-capable 6G-SDI inputs, two SDI outputs, and one HDMI program output. To record your UHD 3840 x 2160 camera output or program output from the switcher, a HyperDeck Studio Pro 2 is included, which records 10-bit 4:2:2 video using QuickTime, ProRes, or Avid DNxHD codecs.

Rounding out the kit are two rack-mounted monitoring options, the Smartscope Duo 4K dual 6G-SDI rackmount monitors and the Lilliput BM150-4K Carry-On 4K monitor with a V-mount battery plate. With a 3 RU height, the Smartscope Duo 4K provides dual 8" displays that support up to 3840 x 2160 video, and it features a tally display around the border of each screen. The BM150-4K is a large, 15" 8-bit LCD with a 3840 x 2160 resolution and HDMI, 3G-SDI, DVI, and VGA inputs. In addition to rack-mounting, it has VESA mounting holes for installation on articulating arms and mounts.

Read below for more information on the components of this kit.

Blackmagic Design Studio Camera 4K 2

The Blackmagic Design Studio Camera 4K 2 is an updated compact and lightweight broadcast camera designed for live production. This is version 2, which removes the internal battery, making for a studio camera that is both lighter and simpler to ship to locations without running afoul of airline shipping restrictions. Constructed from a magnesium alloy body, the camera is light even for travel, yet durable enough for use in the field. It has a large 10" LCD screen with a detachable sunshade and an active Micro Four Thirds lens mount for compatibility with a wide range of lenses. The camera also provides features you'd expect to find in larger studio cameras, such as tally indicators, talkback, XLR audio connections, 12G-SDI inputs/outputs, and even optical fiber via an optional module.

The camera offers Ultra HD resolutions at frame rates of 23.98, 24, 25, 29.97, 30, 50, 59.94, and 60. It also offers 1080i and 1080p resolutions at frame rates of 23.98, 24, 25, 29.97, 30, 50, 59.94, and 60, as well as 720p at 60, 59.94, and 50. It outputs 10-bit 4:2:2 video via its 12G-SDI output. For power, the camera has a standard 4-pin XLR power input for external power sources. The camera control buttons have been placed right below the viewfinder, letting you easily make adjustments without taking your eyes off your subject. The camera can also be controlled via ATEM switchers with a future update. The update will be available as a free download for both the camera and the ATEM switchers, and it will send camera control commands down the SDI program feed to the camera to control focus, iris, gain, and more straight from your ATEM production switcher.

Compact and Lightweight Design

The Blackmagic Studio Camera features a compact magnesium allow chassis that is both lightweight and strong, making it well suited for use in the studio or in the field. The camera body features a rubberized coating that gives extra grip when changing lenses. It's lightweight and compact size makes it easy to transport and be used in tight spaces.

Integrated 10" LCD Screen

The large 10" screen has a resolution of 1920 x 1200, letting you easily view your shots while operating the camera. The large detachable sunshade protects the screen from glare and creates your own private viewing space. With a wide viewing angle, you'll have a clear view of your image even when panning to extreme angles.

Control Panel

For easy operation, all of the most important control buttons are placed right below the LCD screen, letting you make adjustments without having to scroll through complicated menus. You can instantly turn on overlays, adjust focus and iris settings, activate talkback, and even select return program video.

Micro Four Thirds Lens Mount

The Blackmagic Studio Camera uses an active Micro Four Thirds lens mount. Choose from available MFT lenses, or use third-party adapters to mount anything from common DSLR lenses to PL-mount cinema lenses, or even B4 ENG broadcast lenses.

Broadcast Connections

Connections are grouped on both sides of the camera with video in and out (12G-SDI and optical fiber) and power on one side, and XLR audio inputs, headphones, and LANC on the other. This lets you quickly set up and change cables as needed while keeping them out of the way and protected during your production.

Optional Bidirectional Optical Fiber Module

With the addition of an optional and user-upgradeable optical fiber module, you can use standard, low-cost fiber optic cable to connect the camera to a switcher over large distances, even at the largest outdoor venues. The optical fiber connection is bidirectional and carries HD or Ultra HD video with embedded audio, talkback, tally, and even camera remote control.

Built-In Talkback

Built-in talking lets the camera operator and crew communicate at all times during production. The Blackmagic Studio Camera is compatible with general aviation headset connections, letting users choose from a wide range of available headsets. And because talkback is embedded in the optical or SDI video connection to the camera, you don't have to run separate talkback cables.

Illuminated Tally

The Blackmagic Studio Camera supports the tally SDI standard used on the ATEM range of live production switchers. This means that tally from the switcher is broadcast to all cameras from all video outputs of the ATEM switcher and it's sent to the camera via the program video connection. Tally lights illuminate automatically when your camera is live, and it will stay illuminated during multiple camera transitions. With a light on the front for talent, and a light above the viewfinder for the operator, cast and crew can easily see which cameras are on air.

View Program Video

View program video from your live production switcher at the press of a button. Simply press the camera's PGM button and the viewfinder will display the program video feed from your switcher, turning the viewfinder into a large SDI monitor. You can even use the program SDI input to view playback from a local HyperDeck recorder when using the Blackmagic Studio Camera for recording.

Multiple Mounting Points

A variety of mounting points lets you customize your rig to suit your product needs. The Blackmagic Studio Camera includes two 3/8"-16 mounting points on the bottom, and ten 1/4"-20 mounting points on the side and the top.

4-Pin XLR Power Input

There is a standard 4-pin XLR power connector for external power supplies.

ATEM Camera Control Update

This update, which will be available as a free download for both the ATEM switchers and Blackmagic Studio Camera, allows for control of the camera from any ATEM production switcher. It works by sending the camera control commands down the SDI program feed to the camera and lets you adjust focus, iris, gain, and more. Blackmagic has also taken the primary color corrector from DaVinci Resolve and built it into the camera, which can be controlled from the ATEM switcher. This means you can control a full primary color corrector from the camera itself, letting you do more creative corrections than simple color balancing.

Camplex Duplex LC to Duplex LC Singlemode Fiber Optic Patch Cable (Yellow, 98.42')

Transmit your data at high speeds and at longer distances with the Duplex LC to Duplex LC Singlemode Fiber Optic Patch Cable from Camplex. This 98.42' cable comes with an orange OFNR jacket that covers a 9μm core along with 125μm of cladding. Camplex has outfitted this cable with two LC duplex connectors, providing a pull-proof design. Furthermore, ceramic ferrule is used to offer precise alignment of the fiber cable as well as increased reliability.

Precision Signal Processing

Features a 9μm core and 125μm cladding
Duplex Singlemode Fiber
Ideal for patching singlemode backbones to high-speed network devices
Ceramic ferrules for long-lasting reliability and precision alignment
Used to connect patch panels and/or network devices
OFNR jacket complies with stringent building codes

Blackmagic Design SmartScope Duo 4K Rack-Mounted Dual 6G-SDI Monitors

The Blackmagic Design SmartScope Duo 4K Rack-Mounted Dual 6G-SDI Monitors is a monitoring solution for studio and location productions, displaying video with resolutions up to 3840 x 2160 at 30p. It features two 8" monitors each with a loop-through SDI input and output. The inputs are auto-sensing/selecting so you don't have to worry about matching the input format; the monitor will display any supported format that you feed it. You can choose to select to display either the input video or one of six scope displays, while the input video passes through the monitor to downstreamed devices.

You use the USB connector to initialize the monitor on your network; after that you can control the monitors using the supplied software via the Ethernet connector. This allows you to adjust the monitors' brightness and color as well as select the monitors display mode - video or scope view. The SmartScope Duo 4K also incorporates a Tally display around the border of the image, which works with industry standard Tally systems. The unit takes up three rack height units, but is less than two inches deep (including the connector depth), which makes it well suited for use in production trucks where space is at a premium. The unit also automatically flips the image if you need to install the unit upside down.

Note: SmartScope Duo v1 and v2 are functionally identical, with v2 containing a slightly different internal component set.

Features

Monitors SD/HD/3G/6G-SDI Signals

The SmartScope Duo 4K allows you to monitor SD, HD, 2K, and UHD 4K (3840 x 2160) video. The inputs are auto-sensing/switching to match the supported input video format. Each monitor features one 6G input and one reclocked loop-through 6G output.

Video or Scope View

You can select from either the video feed or one of six scope views of the video signal:
  • Waveform: Displays the luminance component of the video signal on an IRE scale.
  • Vectorscope: Allows you to accurately measure colors in the video signal, and is a valuable tool when matching cameras, or when you need to align the hue on the output of decks.
  • Parade: You can choose to display either RGB or YUV Parade. RGB Parade lets you check for illegal colors, plotting them against an IRE Scale. The YUV Parade display shows the YUV component video as it is transmitted down the SDI cable.
  • Audio Views: allows you to monitor 16 channels of audio, checking the levels and the audio phase. You can monitor the levels of all 16 channels at the same time, or monitor the stereo phase of SDI audio pairs. The stereo phase meter plots left and right audio as an XY scope display, and out of phase audio can be seen as either a left or right leaning display.
  • Histogram: The Histogram view lets you see where the pixels are in your video, and how they are distributed from black to white. You can see where the overall exposure is, and if you are exposing the brighter areas of your image with enough detail.

Software Control

The monitor features an Ethernet in and an Ethernet out port, and you set up the unit using the USB 2.0 port. After that, you use the included free control utility with either a Mac or Windows computer via the Ethernet connection to select your views and make any adjustments to the monitor for brightness and color.

Tally

Each monitor supports the Tally function with different colored borders indicating the Tally condition: preview, on air, and recording. The tally connector is compatible with switchers and automation systems.

Reversible

SmartView monitors may be installed in the extreme top or bottom of equipment racks. The SmartView monitor will automatically sense the rotation angle of the screen and flip the image to the correct rotation. You can even remove the front panel and rotate it 180 degrees if required.

Blackmagic Design HyperDeck Studio Pro 2

The Blackmagic Design HyperDeck Studio Pro 2 is a file-based deck that features the same functionality and control of professional tape decks. It records uncompressed video with 4:2:2 color sampling at 10-bit in .mov format, and also records video using either ProRes or DNxHD codecs. With two SSD slots, you can record almost endlessly as one SSD becomes full, recording automatically continues to the other. The Studio Pro features one 6G-SDI input and output for 4K signals, and three SD/HD/3G-SDI inputs and outputs. It supports UHD 4K via HDMI. It also features analog component in/out, analog audio in/out, and timecode in/out.

The Studio Pro 2 is a 1 RU rack-mountable unit with built-in rack mount ears. It features illuminated front panel button control and a jog/shuttle wheel for analog scrubbing. RS-422 control is supported for external control. You can also control the unit using either the USB port or over Ethernet via the RJ45 connector. An integrated LCD on the front panel allows you to monitor the video and display both timecode and transport information.

Rackmount

File-Based Recording

The HypeDeck Studio Pro 2 records to uncompressed Quicktime at 10-bit with 4:2:2 color sampling. It also records to ProRes 422(HQ), ProRes 422, ProRes 422 (LT), ProRes 422 (Proxy), as well as Avid DNxHD and Avid DNxHD MXF.

Two SSD Bays

The Unit incorporates two 2.5" SSD slots, that allow you to record almost endlessly as recording seamlessly switches from one SSD to the other as the first one fills up.

Video Signals

The HyperDeck Studio Pro 2 supports SD, HD, and 3G signals over SDI and HDMI. In addition to NTSC and PAL signals, 720 x 480p and 720 x 576p signals are supported over HDMI, while 4K video is supported via 6G-SDI and HDMI.

Outputs

All outputs are active at all times, so playback is available from all outputs simultaneously, no matter what the original input. This applies to playback from a computer or the SSDs. The exceptions are that 4K output is only available over the 6G-SDI and HDMI connectors, while 480p & 576p are only available as HDMI output.

VTR Style Controls

The HyperDeck Studio Pro 2 features VTR style front panel controls for record and playback. With illuminated buttons, for working in dim locations or settings, while a built-in jog/shuttle wheel provides analog style control over your playback.

Remote

The unit is controllable via RS-422 control and over the Ethernet or USB port.

Built-In LCD Monitor

The unit's front panel also features a built-in LCD screen that allows you to monitor input or playback video as well as timecode, format, and audio levels.

Included Software

The HyperDeck Studio Pro 2 includes HyperDeck Utility, Media Express, Disk Speed test, Blackmagic System Preferences, and Blackmagic driver software.

Blackmagic Design Smart Videohub 12 x 12 6G-SDI

The Smart Videohub 12 x 12 6G-SDI from Blackmagic Design is a mixed format router with 12 6G-SDI inputs and 12 6G-SDI outputs for routing any combination of SD, HD, Ultra HD 4K, and DCI 4K video. It supports 4:2:2 and 4:4:4 color sampling and 10-bit processing for smoother gradations. Housed in a 1RU frame, the Smart Videohub ideal for use in both large broadcast systems or portable mini racks for live productions. A built-in LCD lets view your sources directly on the router itself, with simple push buttons and spin knob provided for control. Routing can also be controlled using dedicated remote panels or over Ethernet using the included software for Mac OS X and Windows. You can even use the available iPad app to change routing over your wireless network.

Note: IEC power cable is not included.

  • 12x 6G-SDI inputs / 12x 6G-SDI outputs
  • Auto-detects between SD, HD, Ultra HD 4K, and DCI 4K and instantly switches standards
  • Built-in SDI reclocking on every SDI input
  • Supports 8-bit, 10-bit, and 12-bit 4:2:2 and 4:4:4 signals
  • 4:2:2 or 4:4:4 color sampling with 10-bit processing
  • UHD 4K (3840 x 2160) up to 30p
  • Supports DCI 4K (4096 x 2160) at 24p
  • HD Video Resolutions up to 1080p60
  • Supports 16 channels of embedded audio on each SDI signal
  • Genlock
  • Reference input compatible with black burst and tri-sync
  • Built-in video monitoring and spin knob control
  • Push buttons on front panel
  • On-screen labels support Unicode so they work in non-Roman character sets such as Chinese, Japanese, Korean, Russian, German, French, Spanish, and more
  • Videohub control software included for control over Ethernet
  • Ethernet control allows direct connection to the computer network and is compatible with Videohub Smart Control and Videohub Master Control panels
  • Apple iPad control panel app available
  • Create your own custom router control with free software developer kit
  • Machined aluminum 1RU chassis
  • IEC power cable required

Blackmagic Design ATEM 1 M/E Production Studio 4K

The Blackmagic ATEM 1 M/E Production Studio 4K is a live event multicamera production switcher with 10 individual Ultra HD inputs built into a 1 RU chassis. Supporting NTSC/PAL/HD and Ultra HD video formats, the switcher connects to a wide range of cameras and sources, delivering a single program stream in UHD 4K, HD, or SD video. All this is done live and in real time with no rendering required. The switcher features a reference video input for synchronizing the switcher to other equipment using tri-level or black burst sync. Each input also features a frame synchronizer, which allows you to use cameras that do not feature genlock as well as input video from computer sources.

The switcher provides eight video outputs that are always active. It features two SDI and one HDMI program output, both of which deliver UHD/HD/SD, with three pass-through (AUX) UHD/HD/SD outputs that can deliver a clean program feed without any downstream effects. The switcher also features a down-converted HD output for monitoring on an SDI-equipped HD monitor. Multiview monitoring is 1080i only over dedicated SDI or HDMI output, and multiview allows you to view the program, preview, and eight live sources at the same time. The switcher features built-in luma and chroma keyers for real-time effects and composites in Ultra HD, with 10-bit processing. Two downstream keyers allow you to use two graphics/logos/titles/lower thirds from up to twenty stored graphics in a wide variety of formats.

A built-in 12-channel audio mixer handles the embedded HDMI and SDI audio from the 10 active video inputs, as well as audio from the balanced or unbalanced analog audio inputs to provide you flexibility and creative audio options. Audio output is embedded in the SDI and HDMI streams, as well as available via balanced audio outputs. Either a Mac or Windows PC running the included ATEM software controls the switcher's operation and settings. For those who like the feel of a physical control panel, the available ATEM ME 1 and ME 2 Broadcast Panels, connected via the Ethernet port, also control all the features of the switcher. Illuminated front-panel buttons allow you to locally select the AUX output, while a 2" LCD screen built into the front of the unit allows you to see the AUX output for instant confirmation of the correct output.

Video

The ATEM 1 M/E Production Studio 4K switcher supports Ultra HD 4K video (3840 x 2160), which is four times the resolution of Full HD. The video format is set by the user and must be the same across each input, as the switcher cannot scale different input formats to match the project format.

Write a review

Note: HTML is not translated!
    Bad           Good

Logo Brands

Brand
Brand1
Brand2
Brand3
Brand4
Brand5
Brand7
Brand6